Performance advantages of the X-Rings vs the O-Rings | News | JIOrings

- Categories : X-Rings
Performance advantages of the X-Rings vs the O-Rings | News | JIOrings

X-Rings or Quad-Rings, the seals with the most support

The O-Ring, the simplest, most versatile and economical option on the market, is a circular seal that can be used in almost any application in any industry that requires a water-tightness guarantee. The X-Ring (also known as a Trefoil or Quadruple Gasket/Seal), with its four points of support exceeds the O-Ring in many technical areas. In fact, it has four main sealing advantages over an O-Ring:

1. On an O-Ring, the hidden parting lines are always at the largest outside diameter, with this being a sealing surface. In a quad-ring, that hidden parting line (also known as flash line) is inside the two outer lobes; therefore, it does not affect the sealing lips.

2. It is more stable in dynamic applications. It is also more resistant to rolling because it has a wider base and better occupies the corners of the application groove. Extrusion is common in dynamic applications that are assembled with O-Rings, where the ring can be extruded or over-recessed. This does not happen with X-Rings.

3. They have a large lubrication retention. The grooves in the internal and external diameter of the ring retain the lubricant, which reduces friction and prolongs the life of the seal.

4. Quad-Rings require less compressive force to seal, since their four-point support design provides a larger sealing surface than an O-Ring.

These multiple seal points require less compression to provide a more effective seal than that required for an O-Ring in the same application. In addition, we must not forget that the less friction and wear, the longer the service life.

X-Rings can be used for any application that an O-Ring can, since they follow the same standard sizing and they are also available in a wide variety of materials (NBR, FPM, EPDM…). Check our stock in real time, with more than 500,000 x-rings at your disposal. Simple, easy and reachable in a few clicks.

Check if the X-Rings you are looking for is in stock

X-Ring Material Hardness SH A Temperature [ºC] Check stock
Quad-Ring / X-Ring NBR 70Sh -20 to +100
Quad-Ring / X-Ring FPM 75Sh -20 to +200
Quad-Ring / X-Ring EPDM 70Sh -50 to +130