No products available yet
Stay tuned! More products will be shown here as they are added.
Stay tuned! More products will be shown here as they are added.
Profile | Material | Brand | Hardness | Temperature |
NBR | Perbunan® | 70 | -20 to +100 ºC | |
FPM | Viton® | 70 SH A | -20 to +200 ºC | |
FPM FDA | Viton® | 75 SH A | -20 to +200 ºC | |
VMQ FDA | Xiametre® | 60 SH A | -50 to +180 ºC | |
VMQ FDA | Xiametre® | 70 SH A | -50 to +180 ºC | |
EPDM FDA | Keltan® | 70 SH A | -60 to +180 ºC | |
EPDM | Keltan® | 70 SH A | -60 to +180 ºC | |
EPDM FDA | Keltan® | 70 SH A | -60 to +180 ºC | |
CR | Neoprene® | 70 SH A | -30 to +120 ºC |
The Cord-Ring is a perfect alternative to substitute O-Rings in maintenance operations when required sizes are not standard. It is a round profile which two ends are bonded together with Loctite or warm-vulcanized. ue to a special finishing, corrective and quality control process, Cord-Ring can also be used in environments featuring a complete vacuum.
We at JIOrings have developed a new production system in partnership with a well-known established manufacturer of rubber articles. This association was created in order to manufacture seals of limitless sizes, in minimum amounts, with no tooling costs and all at a competitive price. You can customize your seals by inscribing a text with a maximum of 40 characters.
The reliability of our system has been widely proven due to the tests conducted, the most noteworthy of which is tensile strength. We have also tested the breakdown of tensile strength and the part of the O-ring in which the vulcanized part is joined in the mould, the same as the value obtained in the other part of the O-ring.
Thickness | Tolerances (mm) NBR | Tolerances (mm) FPM | Tolerances (mm) EPDM | Tolerances (mm) VMQ |
1,00 | ±0,20 | Consultar | ±0,30 | ±0,30 |
1,50 | ±0,20 | Consultar | ±0,30 | ±0,30 |
1,60 | ±0,20 | Consultar | ±0,30 | ±0,30 |
1,78 | ±0,20 | -0,10 / +0,30 | ±0,30 | ±0,30 |
2,00 | ±0,20 | -0,10 / +0,30 | ±0,30 | ±0,30 |
2,40 | ±0,20 | -0,20 / +0,30 | ±0,30 | ±0,30 |
2,50 | ±0,20 | -0,20 / +0,30 | ±0,30 | ±0,30 |
2,62 | ±0,20 | -0,20 / +0,30 | ±0,30 | ±0,30 |
3,00 | ±0,25 | -0,20 / +0,30 | ±0,35 | ±0,35 |
3,53 | ±0,35 | -0,20 / +0,30 | ±0,35 | ±0,35 |
4,00 | ±0,35 | -0,20 / +0,40 | ±0,35 | ±0,35 |
4,50 | ±0,35 | -0,20 / +0,40 | ±0,35 | ±0,35 |
5,00 | ±0,35 | -0,20 / +0,40 | ±0,40 | ±0,40 |
5,33 | ±0,35 | -0,20 / +0,40 | ±0,40 | ±0,40 |
5,50 | ±0,35 | -0,20 / +0,40 | ±0,40 | ±0,40 |
5,70 | ±0,35 | -0,20 / +0,40 | ±0,40 | ±0,40 |
6,00 | ±0,35 | -0,20 / +0,40 | ±0,45 | ±0,45 |
6,35 | ±0,40 | -0,30 / +0,50 | ±0,45 | ±0,45 |
6,50 | ±0,40 | -0,30 / +0,50 | ±0,45 | ±0,45 |
6,99 | ±0,40 | -0,30 / +0,50 | ±0,50 | ±0,50 |
7,50 | ±0,40 | -0,30 / +0,50 | ±0,50 | ±0,50 |
8,00 | ±0,40 | -0,30 / +0,50 | ±0,50 | ±0,50 |
8,40 | ±0,40 | -0,30 / +0,50 | ±0,50 | ±0,50 |
8,50 | ±0,40 | -0,30 / +0,50 | ±0,50 | ±0,50 |
9,00 | ±0,40 | -0,30 / +0,50 | ±0,50 | ±0,50 |
9,50 | ±0,40 | -0,30 / +0,50 | ±0,50 | ±0,50 |
10,00 | ±0,40 | -0,40 / +0,60 | ±0,50 | ±0,50 |
11,00 | ±0,50 | -0,40 / +0,60 | ±0,70 | ±0,70 |
12,00 | ±0,50 | -0,40 / +0,60 | ±0,70 | ±0,70 |
13,00 | ±0,50 | -0,40 / +0,60 | ±0,70 | ±0,70 |
14,00 | ±0,50 | -0,40 / +0,60 | ±0,70 | ±0,70 |
15,00 | ±0,50 | -0,40 / +0,60 | ±0,70 | ±0,70 |
16,00 | ±0,50 | -0,40 / +0,60 | ±0,70 | ±0,70 |
18,00 | ±0,70 | -0,60 / +0,80 | ±0,90 | ±0,90 |
20,00 | ±0,70 | -0,60 / +0,80 | ±0,90 | ±0,90 |
Thickness | Tolerances (mm) NBR | Tolerances (mm) FPM | Tolerances (mm) EPDM | Tolerances (mm) VQM |
---|