Menu
Menu
Piston/Rod compact seal
There are 2 products.
Showing 1-2 of 2 item(s)
Filtrar productos
Productos disponibles
→
Family
Dimension
Material
Hardness
Tech. Inf.
Stock
Expected Stock
Price
Buy
Compact ROD SEAL 32X40X6.30 NBR+FABRIC
Family: Piston/Rod compact seal
Dimensions : 32.00 x 40.00 x 6.30
Material: 15CrMO + NBR65
Color:
BLACK
Part number: K36-032
Weight : 3.4500 gr.
Customs tariff code: 84129080
Country of origin: TR
Piston/Rod compact SEAL 40X48X6.30 NBR+FABRIC
Family: Piston/Rod compact seal
Dimensions : 40.00 x 48.00 x 6.30
Material: 15CrMO + NBR65
Color:
BLACK
Part number: K36-040
Weight : 4.1500 gr.
Customs tariff code: 84129080
Country of origin: TR
TECHNICAL DATA
U-Ring | Profile | Material | Bars | Temperature | Speed |
Compact seal | NBR+NBR/fabric | ≤ 250 | -30 to +105 ºC | ≤ 0,50 m/s |
Quick LINKS
PISTON/ROD COMPACT SEAL
A compact seal is a single acting piston - rod seal which consists of NBR material impregnated on cotton fabric which is initially prepared and moulded with NBR material.
aDVANTAGES
- Functions even with poor surfaces
- Reinforced cotton fabric base prevents the seal from extrusion
- Good sealing at low pressures
APPLICATIONS
Low to medium duty hydraulic cylinders , mobile hydraulics and presses.
WORKING CONDITIONS
FMedia | Mineral oils (DIN 51524) | HFA and HFB | HFC |
Temperature | -30 °C to +105 °C | +5 °C to +60 °C | -30 °C to +60 °C |
Pressure | ≤250 Bar | ≤250 Bar | ≤250 Bar |
Speed | ≤0,5 m/sn | ≤0,5 m/sn | ≤0,5 m/sn |
Surface roughness | ||
| Ra | Rmax |
Dynamic surface | ≤0,3 μm | ≤3,0 μm |
Groove base | ≤1,8 μm | ≤10,0 μm |
Groove flanks | ≤3,2 μm | ≤16,0 μm |
Note: It is recommended to have 50% to 90% of the working surface material contact area value.
Permissible gap (S max.) for NBR | |
Pressure | S (mm) |
150 | 0,20 |
250 | 0,10 |
Note: The largest sealing gap value occurring on the non-pressurized side of the seal does have a vital importance for the function of the seal and in this respect it is quite important to use the S value lower than the above indicated numbers.
INSTALLATION
Compact seals with inner dimension shorter than 40mm are recommended to be used accompanied by open housing seal. It is very important that the assembly tools must be of soft material and have no sharp edges.