Menu
Menu
There are 17 products.
Showing 13-17 of 17 item(s)
Filtrar productos
- Hardness: 93
Productos disponibles
→
Family
Dimension
Material
Hardness
Tech. Inf.
Stock
Expected Stock
Price
Buy
COLLARIN Compacto vástago 56X66X6,60/7,60 TPU93 AZUL
Family: Rod U-ring
Dimensions : 56.00 x 66.00 x 6.60
Material: TPU
Color:
BLUE
Part number: D7056066
Weight : 7.0100 gr.
Customs tariff code: 84129080
Country of origin: TW
Rod compact U-RING 60X68X12/13 BLUE TPU93
Family: Rod U-ring
Dimensions : 60.00 x 68.00 x 12.00
Material: TPU
Color:
BLUE
Part number: D7060068
Weight : 11.6000 gr.
Customs tariff code: 84129080
Country of origin: TW
Rod compact U-RING 70X80X12/13 BLUE TPU93
Family: Rod U-ring
Dimensions : 70.00 x 80.00 x 12.00
Material: TPU
Color:
BLUE
Part number: D7070080
Weight : 16.6620 gr.
Customs tariff code: 84129080
Country of origin: TW
COLLARIN Compacto vástago 100X110X12/13 TPU93 AZUL
Family: Rod U-ring
Dimensions : 100.00 x 110.00 x 12.00
Material: TPU
Color:
BLUE
Part number: D7100110
Weight : 24.2100 gr.
Customs tariff code: 84129080
Country of origin: TW
COLLARIN Compacto vástago 122X130X8/9 TPU93 AZUL
Family: Rod U-ring
Dimensions : 122.00 x 130.00 x 8.00
Material: TPU
Color:
BLUE
Part number: D7122130
Weight : 15.1900 gr.
Customs tariff code: 84129080
Country of origin: TW
Technical data
U-Ring | Profile | Material | Hardness | Bars | Temperature | Speed |
Rod | PU / TPU | 92 / 93 SH A | ≤400 | -40 to +105 ºC | ≤0,50 m/s |
Quick Links
Rod U-Ring
Compact rod U-Rings have symmetrical lips and are generally used in single acting applications. Designed for small bore cylinders, the compact collar design generates a higher preload which is an advantage in lower pressures and long stroke cylinders. JIOrings offers a range of 35 standard sizes.
ADVANTAGES
- Economical sealing solution
- Simple housing design
- Low axial housing height
- Good sealing performance even at low pressures
APPLICATIONS
Construction machinery, forklift trucks, injection molding machines, agricultural machinery, mobile hydraulics, standard cylinders, loading platforms and telescopic cylinders.
WORKING CONDITIONS
TPU92 / TPU93 | |||
Media | Mineral oils (DIN 51524) | HFA & HFB | HFC |
Temperature | -40 °C to +105 °C | +5 °C to +50 °C | -30 °C to +40 °C |
Pressure | ≤400 Bar | ≤400 Bar | ≤400 Bar |
Speed | ≤0,5 m/sn | ≤0,5 m/sn | ≤0,5 m/sn |
Roughness surface | ||
| Ra | Rmax |
Dynamic surface | ≤0,4 μm | ≤3,0 μm |
Groove base | ≤1,6 μm | ≤10,0 μm |
Groove flanks | ≤3,2 μm | ≤16,0 μm |
INSTALLATION
Easily assembled into closed grooves according to the minimum diameter values that are given in the below table. Open grooves or special assembly tools should be used for the values that are outside this table. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the wiper must be oiled with system oil.
Minimum diametre values for closed type of grooves | |||||||
(D-d)/2 (mm) | 4 | 5 | 6 | 7,7 | 10 | 12,5 | 15 |
D min (mm) | 25 | 30 | 40 | 50 | 80 | 100 | 105 |
Maximum permissible gap PU/TPU | |||
C/S | Pressure (Bar) | ||
150 | 250 | 400 | |
≤5 | 0,30 | 0,20 | 0,15 |
>5 | 0,35 | 0,25 | 0,20 |
Note: The largest sealing gap value occurring on the non-pressurized side of the seal does have a vital importance for the function of the seal and in this respect it is quite important to use the S value lower than the above indicated numbers.