No products available yet
Stay tuned! More products will be shown here as they are added.
Stay tuned! More products will be shown here as they are added.
U-Ring | Material | Hardness | Bars | Temperature | Speed |
Rod U-Ring | PU/TPU | 92-93 SH A | ≤150 | -35 to +110 ºC | ≤0,50 m/s |
Rod U-Ring | NBR | 90 SH A | ≤150 | -20 to +120 ºC | ≤0,50 m/s |
Rod U-Rings have a lower inner lip than the outer lip and are generally used in single-acting applications, either hydraulic in the case of PU/TPU or pneumatic in the case of NBR.
Their design presupposes a preloading of the seal body which allows easy absorption of stem deflections and excellent sealing thanks to the compression of the lips during installation. During operation, the system pressure is added to the radial mechanical contact forces. JIOrings offers a range of 400 standard sizes.
Construction machinery, fork-lift trucks , injection moulding machines, agricultural machinery, loading platforms and standard cylinders.
NBR90 | |||
MEDIA | Mineral oils (DIN 51524) | HFA & HFB | HFC |
TEMPERATURE | -30 °C to +105 °C | +5 °C to +60 °C | -30 °C to +60 °C |
PRESSURE | ≤150 Bar | ≤150 Bar | ≤150 Bar |
SPEED | ≤0,5 m/sn | ≤0,5 m/sn | ≤0,5 m/sn |
TPU92 / TPU95 | |||
MEDIA | Mineral oils (DIN 51524) | HFA & HFB | HFC |
TEMPERATURE | -30 °C to +105 °C | +5 °C to +60 °C | -30 °C to +60 °C |
PRESSURE | ≤150 Bar | ≤150 Bar | ≤150 Bar |
SPEED | ≤0.5 m/sn | ≤0.5 m/sn | ≤0.5 m/sn |
TPU95 High performance | |||
MEDIA | Mineral oils (DIN 51524) | HFA & HFB | HFC |
TEMPERATURE | -35 °C to +110 °C | +10 °C to +50 °C | -35 °C to +50 °C |
PRESSURE | ≤400 Bar | ≤400 Bar | ≤400 Bar |
SPEED | ≤0,5 m/sn | ≤0,5 m/sn | ≤0,5 m/sn |
| Ra | Rmax |
Dynamic surface | ≤0,3 μm | ≤3,0 μm |
Groove base | ≤1,8 μm | ≤10,0 μm |
Groove flanks | ≤3,2 μm | ≤16,0 μm |
Minimum diametre values for closed type of grooves | |||||||
(D-d)/2 (mm) | 4 | 5 | 6 | 7,7 | 10 | 12,5 | 15 |
dmin (mm) | 25 | 30 | 40 | 50 | 80 | 100 | 105 |
Maximum permissible gap NBR | |||
C/S | Pressure (Bar) | ||
50 | 100 | 160 | |
≤5 | 0.40 | 0.20 | 0.10 |
>5 | 0.45 | 0.25 | 0.15 |
Maximum permissible gap PU/TPU | |||
C/S | Pressure (Bar) | ||
150 | 250 | 400 | |
≤5 | 0,30 | 0,20 | 0,15 |
>5 | 0,35 | 0,25 | 0,20 |