Menu
Menu
Piston U-ring
Filtrar productos
- Material: TPU
Productos disponibles
→
Family
Dimension
Material
Hardness
Tech. Inf.
Stock
Expected Stock
Price
Buy
Piston U-RING 15X5X8/9 BLUE TPU95
Part number: D1015005
Weight : 1.5600 gr.
Customs tariff code: 84129080
Country of origin: TW
Piston U-RING 15X6X8/9 BLUE TPU95
Part number: D1015006
Weight : 1.5400 gr.
Customs tariff code: 84129080
Country of origin: TW
Piston U-RING 14X8X4/4,50 BLUE TPU95
Part number: D1014008
Weight : 0.7400 gr.
Customs tariff code: 84129080
Country of origin: TW
Piston U-RING 16X10X4,50/5 BLUE TPU95
Part number: D1016010
Weight : 0.9100 gr.
Customs tariff code: 84129080
Country of origin: TW
Piston U-RING 22X14X5/6 BLUE TPU95
Part number: D1022014
Weight : 1.4000 gr.
Customs tariff code: 84129080
Country of origin: TW
Piston U-RING 25X17X4/4,50 BLUE TPU95
Part number: D1025017
Weight : 2.5500 gr.
Customs tariff code: 84129080
Country of origin: TW
Piston U-RING 25X17X10/11 BLUE TPU95
Part number: D1025017/1
Weight : 1.0500 gr.
Customs tariff code: 84129080
Country of origin: TW
Piston U-RING 34X19X8/9 BLUE TPU95
Part number: D1034019
Weight : 5.4000 gr.
Customs tariff code: 84129080
Country of origin: TW
Piston U-RING 30X20X5/6 BLUE TPU95
Part number: D1030020
Weight : 1.8500 gr.
Customs tariff code: 84129080
Country of origin: TW
Piston U-RING 31X23X5/6 BLUE TPU95
Part number: D1031023
Weight : 2.1480 gr.
Customs tariff code: 84129080
Country of origin: TW
Piston U-RING 32X25X5.80/6,80 BLUE TPU95
Part number: D1032025
Weight : 1.8500 gr.
Customs tariff code: 84129080
Country of origin: TW
Piston U-RING 40X25X12/13 BLUE TPU95
Part number: D1040025
Weight : 196.0000 gr.
Customs tariff code: 84129080
Country of origin: TW
TECHNICAL DATA
| U-Ring | Profile | Material | Hardness | Bars | Temperature | Speed |
| Piston | | TPU | 95 SH A | ≤115 | -30 °C to +105°C | ≤0,50 m/s |
Quick LINKS
Piston U-Rings
Piston U-Rings have a higher inner lip than the outer lip and are generally used in single-acting applications, either hydraulic in the case of PU/TPU or pneumatic in the case of NBR. Its asymetrical lips design provides a continuous contact with the bore, even in case of high misalignments and a good response to load peaks and low friction in the low-pressure range. JIOrings offers a range of 330 standard sizes.
ADVANTAGES
- Superior static and dynamic sealing effect
- Economical sealing solution
- Simple groove design
- Easy assembly into closed grooves
- Not affected by structural deformation
- Very good resistance to wear and extrusion
APPLICATIONS
Construction machinery, fork-lift trucks , injection moulding machines, agricultural machinery, loading platforms and standard cylinders.
WORKING CONDITIONS
NBR90 | |||
MEDIA | Mineral oils (DIN 51524) | HFA & HFB | HFC |
TEMPERATURE | -30 °C to +105°C | +5 °C to +60°C | -30 °C to +60°C |
PRESSURE | ≤150 Bar | ≤150 Bar | ≤150 Bar |
SPEED | ≤0,5 m/sn | ≤0,5 m/sn | ≤0,5 m/sn |
TPU92 / TPU95 | |||
MEDIA | Mineral oils (DIN 51524) | HFA & HFB | HFC |
TEMPERATURE | -30 °C to +105 °C | +5 °C to +60 °C | -30 °C to +60 °C |
PRESSURE | ≤150 Bar | ≤150 Bar | ≤150 Bar |
SPEED | ≤0.5 m/sn | ≤0.5 m/sn | ≤0.5 m/sn |
TPU95 High Performance | |||
MEDIA | Mineral oils (DIN 51524) | HFA & HFB | HFC |
TEMPERATURE | -35 °C to +110 °C | +10 °C to +50° C | -35 °C to +50 °C |
PRESSURE | ≤400 Bar | ≤400 Bar | ≤400 Bar |
SPEED | ≤0,5 m/sn | ≤0,5 m/sn | ≤0,5 m/sn |
Note:For special applications requiring high temperatures, U-rings can be manufactured in FPM.
Rugosidad de superficie | ||
| Ra | Rmax |
Superficie dinámica | ≤0,3 μm | ≤3,0 μm |
Ranura | ≤1,8 μm | ≤10,0 μm |
Flancos | ≤3,2 μm | ≤16,0 μm |
INSTALLATION
Easily assembled into closed grooves according to the minimum diameter values that are given in the below table. Open grooves or special assembly tools should be used for the values that are outside this table. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the wiper must be oiled with system oil.
MINIMUM DIAMETRE VALUES FOR CLOSED TYPE OF GROOVES | |||||||
(D-d)/2 (mm) | 4 | 5 | 6 | 7,7 | 10 | 12,5 | 15 |
dmin (mm) | 25 | 30 | 40 | 50 | 80 | 100 | 105 |
Maximum permissible gap NBR | |||
C/S | Pressure (Bar) | ||
50 | 100 | 160 | |
≤5 | 0,40 | 0,20 | 0,10 |
>5 | 0,45 | 0,25 | 0,15 |
Maximum permissible gap PU/TPU | |||
C/S | Pressure (Bar) | ||
150 | 250 | 400 | |
≤5 | 0,30 | 0,20 | 0,15 |
>5 | 0,35 | 0,25 | 0,20 |
Note: The largest sealing gap value occurring on the non-pressurized side of the seal does have a vital importance for the function of the seal and in this respect it is quite important to use the S value lower than the above indicated numbers.