Menu
Menu
Piston U-ring
There are 4 products.
Showing 1-4 of 4 item(s)
Filtrar productos
- Hardness: 90
Productos disponibles
→
Family
Dimension
Material
Hardness
Tech. Inf.
Stock
Expected Stock
Price
Buy
Piston U-ring
≅
Piston U-RING 40X30X7/8 BLACK NBR90
30.00
x
40.00
x
7.00
NBR
90 Sh A
0
60 Units
- 06/05/2024
Piston U-RING 40X30X7/8 BLACK NBR90
Family: Piston U-ring
Dimensions : 30.00 x 40.00 x 7.00
Material: NBR
Color:
BLACK
Part number: A102040030IB9481
Weight : 4.6610 gr.
Customs tariff code: 40169300
Country of origin: TR
Piston U-RING 50X40X7/8 BLACK NBR90
Family: Piston U-ring
Dimensions : 40.00 x 50.00 x 7.00
Material: NBR
Color:
BLACK
Part number: A102050040IB9481
Weight : 5.6000 gr.
Customs tariff code: 40169300
Country of origin: TR
Piston U-RING 60X50X7/8 BLACK NBR90
Family: Piston U-ring
Dimensions : 50.00 x 60.00 x 7.00
Material: NBR
Color:
BLACK
Part number: A102060050IB9481
Weight : 6.8500 gr.
Customs tariff code: 40169300
Country of origin: TR
Piston U-RING 65X55X7/8 BLACK NBR90
Family: Piston U-ring
Dimensions : 55.00 x 65.00 x 7.00
Material: NBR
Color:
BLACK
Part number: A102065055IB9481
Weight : 7.3300 gr.
Customs tariff code: 40169300
Country of origin: TR
TECHNICAL DATA
U-Ring | Profile | Material | Hardness | Bars | Temperature | Speed |
Piston | TPU | 95 SH A | ≤115 | -30 °C to +105°C | ≤0,50 m/s |
Quick LINKS
Piston U-Rings
Piston U-Rings have a higher inner lip than the outer lip and are generally used in single-acting applications, either hydraulic in the case of PU/TPU or pneumatic in the case of NBR. Its asymetrical lips design provides a continuous contact with the bore, even in case of high misalignments and a good response to load peaks and low friction in the low-pressure range. JIOrings offers a range of 330 standard sizes.
ADVANTAGES
- Superior static and dynamic sealing effect
- Economical sealing solution
- Simple groove design
- Easy assembly into closed grooves
- Not affected by structural deformation
- Very good resistance to wear and extrusion
APPLICATIONS
Construction machinery, fork-lift trucks , injection moulding machines, agricultural machinery, loading platforms and standard cylinders.
WORKING CONDITIONS
NBR90 | |||
MEDIA | Mineral oils (DIN 51524) | HFA & HFB | HFC |
TEMPERATURE | -30 °C to +105°C | +5 °C to +60°C | -30 °C to +60°C |
PRESSURE | ≤150 Bar | ≤150 Bar | ≤150 Bar |
SPEED | ≤0,5 m/sn | ≤0,5 m/sn | ≤0,5 m/sn |
TPU92 / TPU95 | |||
MEDIA | Mineral oils (DIN 51524) | HFA & HFB | HFC |
TEMPERATURE | -30 °C to +105 °C | +5 °C to +60 °C | -30 °C to +60 °C |
PRESSURE | ≤150 Bar | ≤150 Bar | ≤150 Bar |
SPEED | ≤0.5 m/sn | ≤0.5 m/sn | ≤0.5 m/sn |
TPU95 High Performance | |||
MEDIA | Mineral oils (DIN 51524) | HFA & HFB | HFC |
TEMPERATURE | -35 °C to +110 °C | +10 °C to +50° C | -35 °C to +50 °C |
PRESSURE | ≤400 Bar | ≤400 Bar | ≤400 Bar |
SPEED | ≤0,5 m/sn | ≤0,5 m/sn | ≤0,5 m/sn |
Note:For special applications requiring high temperatures, U-rings can be manufactured in FPM.
Rugosidad de superficie | ||
| Ra | Rmax |
Superficie dinámica | ≤0,3 μm | ≤3,0 μm |
Ranura | ≤1,8 μm | ≤10,0 μm |
Flancos | ≤3,2 μm | ≤16,0 μm |
INSTALLATION
Easily assembled into closed grooves according to the minimum diameter values that are given in the below table. Open grooves or special assembly tools should be used for the values that are outside this table. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the wiper must be oiled with system oil.
MINIMUM DIAMETRE VALUES FOR CLOSED TYPE OF GROOVES | |||||||
(D-d)/2 (mm) | 4 | 5 | 6 | 7,7 | 10 | 12,5 | 15 |
dmin (mm) | 25 | 30 | 40 | 50 | 80 | 100 | 105 |
Maximum permissible gap NBR | |||
C/S | Pressure (Bar) | ||
50 | 100 | 160 | |
≤5 | 0,40 | 0,20 | 0,10 |
>5 | 0,45 | 0,25 | 0,15 |
Maximum permissible gap PU/TPU | |||
C/S | Pressure (Bar) | ||
150 | 250 | 400 | |
≤5 | 0,30 | 0,20 | 0,15 |
>5 | 0,35 | 0,25 | 0,20 |
Note: The largest sealing gap value occurring on the non-pressurized side of the seal does have a vital importance for the function of the seal and in this respect it is quite important to use the S value lower than the above indicated numbers.